leggings

Vogue 1378 Vogue Donna Karan pieced leggings

These leggings are from Vogue 1378, an old favourite pattern now sadly out of print. I don’t wear a lot of colour or print so I like clothes with seam line interest. But I find a lot of the patterns with extra seams have them placed in a less than flattering way. Not these though. The original pattern is strictly speaking for close fitting trousers rather than leggings, as they’re loose from the calf to the hem and have an ankle vent. But it’s very easy to sew the vent shut and tighten them up by taking in the inseam.

I made these as part of a wardrobe plan; they’re supposed to go under a couple of the dresses. I’m firmly in the Leggings Are Not Trousers camp where my own person is concerned, so no outfit photos of these until I have made at least one new dress to go with them.

Vogue 1378 technical drawing, originally from mccalls.com

They’re designed to be made in a knit, but the construction isn’t the normal overlocked seams. Most of the seams are lapped and top stitched with two rows of a long straight stitch, and then the outside seam allowance is trimmed down close to the stitching. This means the fabric can’t be too stretchy or the seams will break.

I’ve previously made these in thin neoprene, which worked very well, and scuba knit, which wasn’t as robust. This pair are in a thick coated knit that’s meant to look like leather. It came from Tia Knight a few years ago now. It’s super sticky on the coated side so it’s quite difficult to top stitch. A Teflon foot was no good at all. The roller foot worked with my machine set on the maximum stitch length only, and still produced tiny stitches. The walking foot was the only one that produced a decent medium length stitch and even then it isn’t all even, especially on the waist elastic.

The back thigh seam isn’t overlapped. That’s what the pattern says to do, and I have always assumed there is a reason for it. It’s certainly a handy indication as to which way round to put them on.

A closeup of all that lapping and top stitching. I’m quite pleased with the even spacing.

And the waist, with the not so even zigzag top stitching to hold the elastic down. The good thing is that this will never be visible while I’m wearing them.

Although I’ve made these before it was a while ago, and I’d forgotten that the waist is a little low and they’re very long in the leg. This isn’t normally a problem for me with Vogue Patterns so perhaps I added too much extra length when I originally traced them. I ended up shortening this pair by something like 8cm. There’s not a lot I can do about the waist this time, but it’ll never be seen.

Although I’ve not made the dresses I had planned to go with these, they have been getting some wear under my grey Style Arc Toni dress. They’re pretty good for the sunny but cool weather we’re getting in the UK at the moment. This is a pattern I will definitely hang onto.

Vogue 1378 leggings in grey scuba

Vogue 1378 grey scuba side view

There are a lot of garments in this picture – that’s winter for you – but the one this post is about is the grey scuba knit leggings. I cut these out in October and have been sewing them up a tiny bit at a time when the baby is safely asleep. You might think that this is a very long time to take over making a pair of leggings even given that constraint, but in my defence these are not ordinary leggings. There’s a lot of decorative lapped seaming and topstitching which makes them quite a big project. They’re based on the trousers from the discontinued Vogue 1378 Donna Karan pattern. Line art below:

Vogue 1378 line art

You can’t really see it in the line art but the pattern has a vertical opening at the bottom of the leg where those four parallel rows of topstitching are. I’ve always thought that looks a bit odd so I eliminated it. The previous time I made this pattern I did it by overlapping the two pattern pieces for the lower leg and cutting them as one, but I didn’t like the end result because the topstitching fades into the background without a seamline next to it. For this version I cut the two separate pieces but sewed the opening shut by doing the topstitching through both the layers. That way the seam and topstitching matches the other decorative lapped seams in the garment.

Vogue 1378 grey scuba closeup

These are my usual size in Vogue, which is one size down from what the measurement chart would suggest I make. I normally find that works out fairly well. These have zero ease at the hip on me. I had to add some extra width below the knee to make them go over my large calves. I wish I’d taken them in at the ankle because I intended these as leggings not trousers, hence the skirt over the top. The other adjustment I made was to raise the waist. As drafted these came up much lower on me than the intended one inch below the natural waist.

My fabric is a scuba knit from Tissu Fabrics (long since sold out or I’d link it; they have other colours of scuba available though). It was easy to sew but tricky to trim evenly for the lapped seams. You can probably see the edges look a bit ragged in the picture below. It’s also a little too stretchy for the design; I’ve popped a bit of the topstitching since making these. My previous pair in neoprene worked a lot better because it’s that little bit more stable. The neoprene is also thick enough that I can wear that pair without a skirt over the top; the new pair are far too clingy for that.

Vogue 1378 grey scuba back view

So, probably not my most perfect or flattering make but they are warm and washable so I’ve worn them quite a lot since finishing them. You can’t say fairer than that.

Vogue 1378 grey scuba

Save