It’s finally time to start my winter coat project. I’ve made a decision at last: it’s going to be Burda 114 11/2019, but without the ribbon tie. There’s a zip and snaps under the overlap so I don’t think I’ll miss the tie.
As it is a Burda pattern, that means the first step is tracing the pieces from the magazine. I do this on thin paper off a huge roll I bought from Morplan some years ago. It’s the most cost effective way to get good tracing paper that I’ve found. But when I came to start this one, I discovered I was at the end of the roll. It seems unbelievable that I’ve used up 300m of tracing paper. I trace envelope patterns as well as magazine patterns but even so I’m surprised.
I’ve acquired another of the rolls now and started work. Tracing really does take time. I’ve heard people say they can trace off a Burda pattern in half an hour. By the time I’ve copied the original pieces, added the seam and hem allowances, done the pattern adjustments I need, and checked it all still fits together I’m looking at 2-3 hours total for a moderately complicated pattern. This coat has only nine pieces – I have used patterns in the past with more than 30! I’ve already got gadgets for adding seam allowance, and a big table to work on. I really don’t know how else to make it any faster. Top tips welcome; I can’t wait to get through the tracing and get on with a toile.
I’ve been working on this shirt dress for about a month now. It’s Burda 116 09/2014. This has been on my Burda to-sew list for a long time, but I struggled to find the right fabric. Burda’s version is in grey chambray. The variant design (tunic length, with a hood instead of a collar) is made in wool muslin – a fabric I don’t think I have ever encountered in the wild.
Mine’s ivory stretch cotton poplin from Tissu fabrics. This makes it more of a big shirt than a shirt dress – at least that’s how I’m intending to wear it. I had the fabric in stash, left over from a very full-skirted McCalls shirt dress I made a while ago, and eventually realised it would work for this. There was only just enough and I had to piece the drawstring casing. It’s so satisfying to only have tiny scraps left over though.
This is a dress with a lot going on. I find a lot of sewing patterns have much less detail than equivalent ready-to-wear garments, but this one can’t be accused of that. About the only thing missing is a back yoke. I haven’t got any modelled pictures yet, but here are closeups of all the crunchy details.
The collar is unusual. It’s a band collar, but it stops where the front placket starts instead of overlapping. This makes for quite a weak point at that sharp inward corner between the band and the placket. I’m a bit concerned it won’t wear well and I think next time I’d add some interfacing there.
There are patch pockets on the front, which I suspect are more decorative than useful, and side seam pockets too.
And then there’s a drawstring at the waist. Don’t look too hard at the buttonhole position; it’s too high. It won’t show when the drawstring is tied though.
The back is plain apart from the drawstring casing at the waist. I think a back yoke would be a nice addition but I’m way too lazy to adjust the pattern.
I love the hem treatment. There is a very deep hem facing which gives a completely clean finish. A weighty hem is so much nicer on this kind of dress than a narrow one.
The sleeves are finished with elastic in a casing instead of cuffs. I like how it echoes the waist.
I’m looking forward to figuring out how to style this. I might try it over my silver jeans or my grey Oxford bags. Lots of possibilities. Ideas welcome!
Sadly however the end result does not look at all OK on me. It’s oddly droopy in most places, and yet tight across the bust.
I did make a few changes which may have contributed to the problems. I used a stable ponte knit instead of a woven. I checked the ease on the pattern and it seemed OK for a knit, but once I tried the dress on I realised I should have sized down and done a full bust adjustment. I also added somewhat unsuccessful hip pockets; the lines don’t harmonise with the princess seams on the bodice very well. And I made the sleeves full length, only I got that wrong too and they are only full length because they’re not hemmed!
This is the dress where I followed Burda’s method for adding length to a bodice by splitting the adjustment above and below the bust point, instead of adding it all below as I’ve been doing for years. Many commenters said Burda’s instructions didn’t sound like a good idea and you were right! Look how deep the armscye is. At least I know now not to bother with that again.
I’m also not terribly happy with the neckline and collar. Burda’s version has square corners and a sharp v, but the sewing lines on the pattern are curved. I followed the pattern without really thinking, and the end result is pretty different to the one photographed in the magazine. It’s not curved enough to look intentional in my opinion.
I’m pleased with my top stitching though. There’s a lot of top stitched seam detail on the back. I skipped the centre back zip as I was using a knit.
I’m also quite pleased with the finish I got on the inside. The lining is black tricot mesh. It was an absolute beast to sew; it slipped and snagged at every opportunity.
But unfortunately I don’t think the dress is savable because of the armscye problem. Everything else could be fixed or lived with, but that would need recutting the whole bodice and I haven’t got any more of the fabric. And to be quite honest I’m pretty much over this one and don’t want to put the effort in! I’ll just have to chalk it up to experience.
This is my favourite part of the sewing top fives: writing about the ones that didn’t work. And the good news is that I’m struggling to find five complete fails from 2019 – this year there are only four.
The first was a pair of trousers for my son. I traced the pattern (Burda 127 03/2018), cut them out, and then left them for a couple of months. Which was stupid because children grow. By the time I made them up they were much too small.
I wasn’t entirely convinced by the drafting either; they’re intended for that awkward size where the child may or may not still be in nappies, but you’d never fit a nappy under these. What I’ve learnt from this is that it’s a lot cheaper and easier (in the UK at least) to buy trousers for toddlers than make your own.
The next fail was also for my son, but the same pattern (a RTW copy based on Burda 138 03/2014) also featured in my top five hits. I first made it in green polar fleece as a trial run, and he loved it. The red ‘real’ version here is made from soft shell and is not loved – in fact I can’t get him to wear it. I think the problem is that the fabric is too robust. It’s much more of a coat fabric than a sweater fabric. Pity because it’s a lovely colour and I was very pleased with how it came out. I may have to pass this on to one of his friends.
Now on to things for me. I made a toile of Burda 118 09/2010, a coat I’ve loved for years, thinking the pattern couldn’t possibly be as bad as all the reviews said. And I think it could be made into a wearable garment. But have I done all the work needed to fix the many problems with the pattern yet? No. Maybe next year. Maybe never.
This last one is probably my worst fail. It’s a remake of Burda 128 10/2010 in black sateen. It’s a bit tricky to sew and I put quite a lot of extra effort into adding pockets to the design, but I’ve hardly worn it. It’s too short and tight. The first time I made it I used a knitted fabric and I suspect I’ve also put on a few inches since then, so it was silly to think I could use the same pattern pieces this time around. Funnily enough it doesn’t look too bad in the picture. I wonder if there is some styling trick that would mean I can get some wear out of it.
So that’s one poor fabric choice, two fitting fails, and one bad pattern. The only one I’m really frustrated about is the black dress – the too-small trousers were made from leftover fabric, the coat never got beyond a toile, and at least I got one good garment out of the toddler top pattern.
It’s that time of year again: Sewing Top Fives. This is definitely my favourite blog series! So without further ado, here are my top five projects of 2019.
First up is a garment that wasn’t for me: it’s a fleece top for my son. I used Burda 138 03/2014 as a basis for the pattern but the collar and neckline is copied from a much loved RTW top. He wore my version a lot until he grew too big for it. I think a big part of the appeal is that his dad has a hoodie made from the same fabric. I should definitely make it again, a size or two bigger.
The next one is a pattern repeat; this is the fourth version of Style Arc’s Toni dress I’ve made. It took a few iterations but I’ve got the pattern completely adjusted to my liking now. It’s a great summer dress; very easy to wear but still looks stylish. There will be more of these in the future.
Three is another well loved pattern: Burda 117 02/2012 made in a grey ponte. This is another one where I’ve adjusted the pattern quite a bit over several versions. I think I am finally happy with it now. I have this one and a black scuba version in regular rotation at the moment.
I haven’t made many trousers much this year but this pair of cargoes have been a huge success. The pattern is Burda 121 02/2018. They have a lot of fiddly details but the end result really looks like RTW and I have worn them lots despite a less than perfect fit (hard to see in the picture but they’re too big on the waist). I’m slightly disappointed in the fabric though. It has already faded from a mid grey to a very light grey.
But this has to be the best project of the year, my Burda trench coat. It gets worn most days and it’s the perfect combination of easy to throw on, goes with everything, but still looks like I’ve made an effort. The original pattern is 105 02/2019 but I made a lot of changes to the shaping.
Four out of five of these are Burda patterns. This isn’t a surprise: I mostly sewed from Burda this year because I’ve been cutting back on envelope pattern purchases. I have to say that my Burda back catalogue has provided a suitable pattern for practically everything I’ve wanted to make, so there’s a lesson there.
So I’m making Burda 116 09/2018, very slowly indeed. It’s got quite a lot of pieces and I’m making things slightly worse by adding hip yoke pockets, although I’m also skipping the zip and most of the lining.
I’ve got a longer than average torso so I always add 5cm to the length of dress bodices to make the waist match up with my actual waist. I started sewing with Big Four who always put a lengthen/shorten line between the bottom of the armscye and the waist. Adding a ton of length there can leave the bust point too high, but it’s easy to do. But I notice Burda recommends doing it differently: adding only 2/3 of the extra length there, and the other 1/3 above the bust point. Which lowers the bust point but means changing the armscye and sleeve too. So in a fit of enthusiasm I decided to try that this time. Here are my adjusted front bodice pieces.
I’m…unconvinced. That looks like a huge change to the armscye to me. I’m carrying on for now but I won’t be surprised if the sleeves fit strangely.
So about this time last year I was agonising over what pattern to choose for my winter coat. And the perhaps inevitable result was that I didn’t make a winter coat at all in the end but made my ancient version of Vogue 1276 last another year. The lining is destroyed and there are lots of shiny patches where the fabric nap has worn off but it’s still plenty warm. Just don’t look too closely.
But I’d still really like to replace it with something less scruffy. I am currently trying to decide between two patterns, neither of which was in the running last year. The first is (out of print) Vogue 1321, a Donna Karan design that I’ve got a copy of in my pattern stash.
I’m pretty sure the design is this one from her 2011 Fall collection, although it looks a different colour from the pattern envelope one. Anyway it ticks most of my boxes: it’s quite long, should be warm with all those yards of fabric in the skirt, and I love a dramatic collar.
One detail that’s not very apparent from the photos is the raw edge finish. This means using a fabric that won’t fray too badly; Melton or boiled wool probably.
Of course it’s not a perfect choice: the pattern is unlined. If I make this one I’m definitely going to have to add a lining. It’s unsurprisingly a complete fabric hog as well; something like four and a half metres of wide fabric.
My other choice is completely different and very new: the long padded coat from the November 2019 Burda. I’m showing the technical drawing and not the model photo because I don’t really care for the fabric they used for the sample. I’m also not sold on the ribbon tie, but that’s purely decorative and can be left off: there’s a zip and snaps as well.
I think this would look great in a high shine metallic fabric – real science fiction vibes.
There are possible construction issues with this plan. Sewing the lines of top stitching on metallic fabric will be tricky. They are sewn through the shell fabric and a layer of batting, so there needs to be some way of preventing the batting from shifting. I can’t use pins because they will leave marks. I understand that basting spray for quilting is a thing, but I’ve also read that it doesn’t work well with high loft batting which is what this pattern needs. Maybe basting spray and then pins in the seam allowances? Anyone with experience of basting spray willing to advise?
I’m very torn as to which of these to pick. They’ll cost about the same and they’re both big projects. The Donna Karan is more classic, but the Burda is more fun. Decisions, decisions…
This dress is an old favourite pattern from one of the best issues of Burda ever. This must be the sixth time I’ve made it, although I’ve altered the pattern somewhat from last time so hopefully this won’t be a totally boring blog post. Anyway. The original is Burda 117 02/2012 which came in a plain black and a colour blocked version. Both had an exposed zip all the way down the centre back seam, no pockets, little tucks at the shoulder seam, and a snap closure at the front bodice. Here’s the line art (curiously missing the zip). The tucks are only just visible as the slight dip in the shoulder line.
I’ve added pockets in the slanted front waist seams, left off the tucks to give a stronger shoulder line, and extended the left front bodice piece (the underlap) to end at the same line as the right front bodice, removing the need for the snaps to hold it in place. That gives a better finish and there’s no danger of anything popping open.
I also made facings for the armscyes this time rather than adding hem allowance and turning under as the pattern suggests. It’s surprisingly tricky to shape the hem allowance to lie correctly because the armscye is pointed at the bottom and on the left side three seams come together there. Every previous version I’ve made had a gap in the hem at the bottom of the armscye, saved only by the fact that knit fabrics don’t fray. Separate facings are a big improvement.
I also skipped the zip. The dress is made of ponte knit and is no problem to get on and off without closures. The zip can look great but I think it’s a bit too much in a plain version. I wanted the seaming to be the main focus.
The fabric is a viscose/poly/elastane ponte from Croft Mill. It’s a mix of dark grey and brown fibres although I think it looks almost purple in these photos. As I write it’s still available here. It’s probably very slightly too lightweight for the style because there is a bit of cling; a heavy scuba works best. But I love the colour.
This dress is the second creation from my probably futile attempt to sew my way through my entire wishlist of Burda dresses. Two down, only another fourteen to go…
I’ve been feeling a complete lack of sewing inspiration lately, while still really wanting to make things. Some kind of system for choosing projects seems like it might help with that. I have had a Burda subscription for quite a while and I know how to make their draft fit me, so I decided to sew my way through my favourite Burda dresses from the collection.
Obviously there are a lot of dress patterns to choose from in ten years of magazines. If I just put everything that caught my eye on to the list it would be completely impossible to get through it. So I narrowed it down by only including ones which either have pockets or are easy to add pockets to. After that I tried to analyse which are likely to suit my figure. I’ve been finding Doctor T’s series on Kibbe style types very interesting. No style typing system is ever going to work for everyone but this one is useful for me because I clearly fall into a particular Kibbe category and more importantly, I generally enjoy wearing the kinds of things Kibbe recommends for it. (Dramatic, if anyone’s interested: lots of long vertical lines, monochrome colour schemes, angular shapes).
Don’t worry I’m not about to go through the whole list of patterns right now…for one thing it’ll be deadly dull and for another I doubt I’ll actually manage to sew them all. But here are the first three. I’ve made one and two, and the third one is in progress.
The first one is 110 08/2017. It has long vertical lines so that’s an instant win. I added pockets hidden in the pleats across the skirt front. I bought shoulder pads (a Kibbe recommendation) but my fabric choice meant they’d be far too visible so I ended up not using them.
Here’s how it came out. It’s not perfect but it’s been getting a lot of wear.
Then there is 117 02/2012. At first sight this doesn’t look like an ideal selection according to Kibbe’s guidelines; there’s too much waist emphasis and it’s not long enough. But I’ve made it five times before and the versions done in solid colours have been firm favourites (the colour blocked one and the striped one, not so much). I think it works because of the angular seaming and v neck. I added pockets in the front seams and left off the shoulder tucks which gives a stronger line. Pictures of all that next week.
The one I’m working on now is 116 09/2018 which reminds me strongly of the white dress worn by the character Luv in Blade Runner 2049. So, erm, secret evil replicant cosplay.
And here’s the Burda dress.
The lines of the dress are not quite the same: hers has a separate collar and the princess seams continue into the skirt; there may not even be a separate waistband section as it is always styled with a belt. But the overall shape is similar. I’m not making mine in white though, at least not for the first version. If it works I might do it again in white scuba just for fun.
I’ll keep posting about this as I work my through the list, although I’m certainly going to allow myself to sew other things in between – I still need a winter coat after all!
Black is so difficult to photograph! This is my version of Burda 110 08/2017 (the link is to the Russian Burda site because of the recent changes on the US site). Hopefully you can see the details, because this dress has a lot going on. Gathering, pleating, buttons, and believe it or not there are pockets too, hidden in the skirt front pleats. Those aren’t part of the original pattern. They are horizontal inseam pockets inserted in an additional seam added by slashing the skirt front pattern piece along the inside fold of one of the pleats. Once the skirt is made up the pleat folds itself over the top of the pocket and hides the opening.
Here’s Burda’s version. Beautiful, but I bet they had to photograph it carefully. The fabric has to be lightweight and very elastic to work for this design, and when it’s white as well there must be huge potential for accidentally revealing more than intended. I added an underlining to the skirt in my version to get better coverage, and if I ever make it again I’ll do the same with the bodice as well. To reduce bulk at the seams I made separate underlining pattern pieces from a basic pencil skirt shape without any details, and then mounted the gathered and pleated fronts and backs onto them.
You can see in this back view that my slip is showing through at the shoulders. A second layer would probably have helped with that. The fabric is a lightweight single knit viscose/elastane jersey from Croft Mill. At the time of writing it’s still available. With my pattern alterations I used pretty much every scrap of three metres; I was worried I wasn’t going to be able to cut the whole thing. If I remake this I’ll buy a bit more fabric next time so I can underline the bodice too.
This is a Tall pattern, and the design is certainly proportioned accordingly, with the long slim skirt and cuffs. I found the cuffs came out a little baggy on me and would narrow them slightly another time. I don’t think I have unusually thin wrists so that’s worth watching out for if you’re making this.
What’s slightly surprising about the design is that they have you put in a really long zip, from the neck point right down to the hips. This is somewhat tricky to do: the fabric isn’t particularly stable to start with and then there’s the thick gathered section at the centre back skirt seam to negotiate. The zip isn’t necessary for getting the dress waist over your hips, because the waist’s elasticated anyway and the fabric, as previously mentioned, has to be very stretchy. I can get the dress on without undoing the zip or buttons at all. Admittedly it messes up my hair, but if that’s a consideration then a shorter zip to centre back would solve that and be a lot easier to install.
I like the button detail at the back of the neck. They’re secured with thread loops which are oddly satisfying to make. Pleased with the buttons too; they’re just plastic but they are exactly right for this dress.
This has turned out to be a surprisingly wearable dress. The stretchy fabric means the long pencil skirt isn’t as restricting as it looks, and it’s quite warm. The pockets haven’t worked as well as I’d hoped; the fabric is too light to support much weight so anything like a phone tends to distort the skirt front. I think that could be reduced by adding interfacing, or maybe extending the back pocket into a stay that could be caught in the waist seam. I cheated for the photos and didn’t put anything in the pockets.
I do think it needs a belt to make it look finished, and it needs to be leather (or fake leather) rather than fabric. Or maybe I should add more length to the bodice to make it blouse out and hide the waist seam.
I’m kind of tempted to make this again. White would look great but I don’t have any shoes that would go with it so I’d never wear it. Maybe beige or taupe?