Blanca

Closet Core Patterns Blanca Flight Suit modelled photos

A woman in a black jumpsuit and yellow trainers leans against a bench

I posted about this jumpsuit last week but now I have photos of it on me, thanks to my husband, and it’s always easier to talk about fit when there are pictures to look at. This is Closet Core Patterns’ Blanca Flight Suit. I normally stick to Burda and Vogue patterns, with occasional diversions to Style Arc, but I had a clear idea of the sort of jumpsuit I wanted to make and even with ten years of Burda back issues I couldn’t find one with all the right details. Blanca had everything I was looking for, so I decided to risk an unfamiliar block and sizing system, and sprung for the paper pattern. Here’s the line art:

Technical drawing of a jumpsuit with various sleeve and arm options
Blanca flight suit line art, closetcorepatterns.com

It comes with several options to change the look up a bit, although nothing radical: short or long sleeves, two belt versions, two breast pocket versions, optional tabs for tapering the leg and optional press studs for tapering the arm. I added the optional tabs and press studs on mine and did the breast pockets with zips, the buckle belt, and the long sleeve. A jumpsuit is a big project so I wanted to be able to wear it a few different ways. Below is with wide sleeves and trouser legs.

A woman in a black jumpsuit and yellow trainers sits on a bench

I think one of the cleverest features about this is the back. There are top stitched pleats to give a little interest and extra reaching room. And it does need it: this is designed to be fairly snug, especially on the hips. (Excuse the keys in the pockets in the picture below).

Now obviously it would have been sensible to make a toile before diving into a big project with a pattern company I’d not tried before, especially as they have their own sizing system. But my sewing time is limited, so instead I carefully consulted the very detailed table of finished garment measurements provided to choose a size and decide on adjustments.

I ended up making the sizes my body measurements put me in (sizes plural because I am more pear shaped than the Closet Core block) but that was because my fabric is slightly stretchy; it’s Empress Mills’ 7.5oz premium denim. I added 5cm length to the bodice and sleeves, and 6cm to the leg. The body length has come out fine overall but the waistband is lower than I expected; definitely below my natural waist. And I wouldn’t want the legs any shorter.

I was slightly surprised by quite how close fitting it turned out. I knew there wasn’t any ease at the hip, but from reviews I’d read I’d expected the bodice to be more blousey. It’s not a bad thing, but I’m still debating if I can safely wear it to work. And if I made this again in a nonstretch fabric I’d size up one. As it is, it requires a slight wriggle to get on but once there it’s comfortable.

Here it is with tapered arms and legs. I wasn’t expecting to like this look as much as the wider option but in fact I think it works.

Despite the sizing surprise I’m very happy with the way it’s come out. I even found myself browsing the Empress Mills denim section to see if any of the other colours the fabric comes in caught my eye for a second version. But as I’m still slogging my way through my wardrobe sewing plan, that’s going to have to wait a while.

All the hardware: Closet Core Blanca flight suit

This is the Blanca flight suit from Closet Core Patterns. It wasn’t on my original wardrobe sewing plan, but it fits in well with the other pieces. And I wanted a project that would make use of one of my birthday presents: a hand press. This gadget makes installing press studs (or rivets, or grommets) absolutely painless. Each type of hardware needs a different set of dies which screw into the press, but once they’re on, installing hardware takes seconds and requires very little strength. No more loud hammering noises, and it sets the studs perfectly straight every time. The only problem is that it’s so simple it’s all too easy to get overconfident and install a press stud on the wrong side of the garment. Luckily there were no disasters on this project.

Blanca has press studs on the sleeves which can be used to turn the wide sleeve into a tapered one.

And tabs on the ankles which can be used to taper the leg. The pattern calls for buttonholes and buttons here but I wanted to keep things consistent, so more press studs.

It’s a very well thought out pattern with a lot of options. I went for all the bling with the zipped breast pockets and the buckle belt.

I struggled a bit with the zips on the pockets and my topstitching is distinctly wobbly. I probably would have done better with lighter weight zips. But these were a good match for the teeth on the centre front zip.

It took me a lot of searching to find the buckle. Once I figured out the right search term (surcingle, if like me you didn’t know) they’re plentiful on eBay. They seem to mainly be used for horse blankets of all things.

I was complaining about my inability to sew good belt loops the other week. These ones aren’t bad. I made them as flat as I could with the folding in three method, and kept the turn under short. I didn’t hammer them but pressed them as hard as I could before sewing them on. Still not perfect, but better than the last lot.

There’s just one thing I’d like to change about the pattern, but I’m not sure how. The underlap for the front zip has an overlocked edge that’s visible when the collar is open. That edge needs to be pretty flat so replacing it with another seam wouldn’t be great. Perhaps bias binding on the edge?

Modelled photos coming soon I hope.